ACOM ATU O4AT AUTO ANTENNA TUNER And COAX SWITCH
Acom Auto Tuner with 4 connectors
NEW DELIVERY WE HAVE STOCK .
THIS ARE FOR TOWER MOUNTING WITH PROTECTION COVER ORE TO MOUNT FOR DESK MOUNTING WITOUT THE PROTECTION COVER.
New ACOM ATUO4AT automatic remote antenne tuner with four -position antenna switch. it matches the selected antenna impedance to the ACOM solid state HF +6m amplifier ONLY FOR Acom 600S and 700S and 1200S,
You can place the tuner at 100m from your house.or direct on the table next to your HF Transceiver, to do this you must remove the protection cover for outdoor mounting and put the black box next to your radio or to a different place inside the house with the special mounting.
Tuning via the MENU SELECTION Acom 600S ore 1200S (ATU SERVICE)
Power up to 1200 watt with SWR below 3:1
Power up to 900 watt with SWR below 3.5:1
Power up to 700 watt with SWR below 4:1
Power up to 500 watt with SWR below 5:1
Power up to 300 watt with SWR below 7:1
Power up to 200 watt with SWR below 10:1
SWR above the 10:1 are NOT alowed to tune, this are damage the Acom Amplifier.and there are NO warranty service.
RF input to tuner via the coaxcable
Coax cable RG213 Mill ore RG214 or EcoFlex ( NOT RG 58-5-7 Cable)
Antenne selection this tuner have 4 UHF type ( SO239A) connectors.
Wide 500mm (20.1") x Dep 400mm (15,8") x High 300mm (11.8")
weight 11,5kg ( 23,00 lbs).
Only at special order delivery into 2 weeks when this are on stock by Acom