ACOM 500S 160m/28MHz +50MHz+70MHz

Beware if you from Danmark /Zweden/Norway the VAT are 25% we must charge you 4 % extra Finland 25,5% Greece 24% Hungary 27%

MODEL 2026

THE AMPLIFIER ACOM 500S MODEL 2026 ARE ON STOCK

BEWARE THE TUNER O6AT ARE NOT INCLUDED THIS YOU CAN OREDER ON THE WEBSITE.

Frequency Coverage

• All amateur bands from 1.8 through 70.5 MHz;
• Extensions and/or changes on request;

Rated Output Power

• 500 W ±0.5 dB, PEP or digital;

Intermodulation Distortion (IMD3)

• Better than 30 dB below rated PEP;

Harmonic and Parasitic Emissions Output Suppression

• Below 30 MHz - better than 50 dBc below rated output;
• Above 30 MHz - better than 70 dBc below rated output;

Input Impedances

• Nominal value: 50 Ohm unbalanced, UHF (SO-239A) type connectors;
• SWR: Below 1.5 (1.2 typically), 1.8-70.5 MHz continuous range;
• RF bypass: SWR - below 1.1, 1.8-70.5 MHz;

Antenna Impedance

• Nominal value: 50 Ohm unbalanced;
• Two antenna outputs available:
  • RF OUTPUT 1 output provides seamless integration with the auto-switching antenna tuners ACOM 04AT or ACOM 06AT, for access from amplifier's front panel to 4 antennas having an SWR up to 3, within 160 to 6 meter bands;
  • RF OUTPUT 2 - A well-matched antenna with an SWR below 1.5 can be connected to this output for any band. While low SWR is good for any band, it is extremely important on 6 and 4 m. RF OUTPUT 2 is not intended for ACOM 04AT or ACOM 06AT antenna tuners;
• Antenna connectors: PTFE UHF (SO-239A) type;

RF Power Gain

• 14 dB ±1 dB (typically 20 W drive for rated output);With MRF1K50H Mostfet

Mains Power Supply Voltage

• 100-240 VAC ±10%, 50-60 Hz, Single phase;

Mains Power Consumption at Rated Output Power

• Up to 1000 VA;
• Power factor at rated output: 0.95 or higher;

Mains Power Consumption in Low Energy (Waiting) Mode

• Less than 1 VA;

Safety and Electromagnetic Compatibility

• Complies with CE safety and electromagnetic compatibility requirements, as well  as with the US Federal Communications Commission (FCC) regulations;

Size & Weight (operating, excluding connected cables)

• WxDxH: 291x270x157 mm, 7.8 kg (11.5x10.7x6.2 inches, 17.2 lbs.);

Shipping Size & Weight

• WxDxH: Approx. 500x470x380 mm, 11.6 kg (19.7x18.5x15.0 inches, 25.6 lbs.);
• Please, contact us for shipment details;

Operating environments

• Temperature range: -10 to +40 degrees Celsius (14 degrees F to 104 degrees F);
• Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
• Height above sea level: up to 3050 m (10000 ft) without output deterioration.

PRODUCT CODE:85176990

CALL FOR THE TRANSPORTCOST FIRST OUTSIDE THE NETHERLANDS AND OUTSIDE THE EU.

REED THIS ALSO:

Many customers asked us:
What is the warranty of the LDMOS transistors used in ACOM power amplifiers?
The answer is easy, but first, please read these statements:

NXP Semiconductors | LDMOS transistors producer | www.nxp.com(link is external)
" ... NXP makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does NXP assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in NXP data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. ...". 
" ... (c.) Time Period. Except as provided in subsections (d) and (e) below, Products are warranted for a period of one (1) year from date of delivery to Buyer. ...".

AMPLEON | LDMOS transistors producer | www.ampleon.com(link is external)
" ... Seller warrants that under normal use the Products (excluding any Excluded Products) shall, at the time of delivery to Buyer and for a period of twelve (12) months thereafter (or such other period as may be agreed upon in writing by the parties), be free from defects in material or workmanship and shall substantially conform to Seller’s specifications for such Products, or such other specifications as Seller has agreed to in writing, as applicable. ...".

Extra RCA cable for TX long:1,20m price : 
Extra RCA cable for TX long:3,00m price : 

Connection Acom 1010 on Icom 756Pro 3:On ACC 2 7pin connecto
Connection Acom 1010 on Icom 7100 on special ACC cable13pin+cable 

Connection Acom 1010 to TS590/TS570 Kenwood with 7 pin Din:
Connection Acom 1010 to Yaesu FT897 (Cat/Tuner) with 8 pin mini Din:
Connection Acom 1010 to Yaesu FTDX 1200 with 10pin mini din to RCA: 
Connection Acom 1010 to Yaesu FTDX 3000 with RCA cable to TX Ground : 

Din connector:7 pins : 
Din connector:8 pins mini :
Din connector:10 pins mini : 
Din connector:13 pins: 
Din connector:13pins with 13 wire: