Acom 2S1 Automatic XCVR

Acom 2S1Auto XCVR


Acom 2S1 Automatic XCVR

More details

This product is no longer in stock

€ 295.00

tax incl.

Als u in deze webshop gaat afrekenen kunt u kiezen uit verschillende betaalmethoden.
Als u in deze webshop gaat afrekenen kunt u kiezen uit verschillende betaalmethoden.

We ship worldwide

Transport insurance possible

ACOM 2S1 Automatic XCVR Commutator


T/R System QSK mode capable

Protections one transciever's input is grounded while the other transciever transmits, simultaneous transmission is prevented.

T/R sequecing and RF relay contacts are continuously monitored.


Frequency Coverage All amateur bands 1,8-54MHz

Through-line Power: up to 200W PeP or continuous carrier

Input and Output Impedances: 50 Ohm

UHF (SO239) type connectors

VSWR below 1:1:1 ( 1,8-54MHz)

VSWR below 1:2:1 up to 80MHz

Power Supply: 11-14VDC,less than 30mA consumption

Size & Weight: W110mmxD42mmxH67mm , 350g incl cables

Warranty 2 year

Payment with PayPal extra 4% on the total cost

Transportcost Call us for the price

Power:600 Watt Plus ( max 750 W).

Power Mosfet Transistors:Type MRFE6VP6300H (withstand high mismatch SWR).

High resolution color display:800x480 pixels and 24-bits colors.

Intermodulation distortions (IMD 3) better than 28dB (30dB typically) below the rated PEP output.

harmonic and parasitic emmissions output suppression better than 60dB (65dB typically).

Input and output impedances: Nominal value: 50Ohm unbalanced.

UHF (SO239) Type connectors.

Input circuit: Broadband, SWR below 1.2:1 (1.1:1 typically).

Frequency :1.8-54Mhz continous range without retuning or switching.

RF by-pass path SWR-below 1.1:1 from 1.8-54MHz.

Admissible SWR at the output load (the Antenna) up to 3:1 with proportional power reduction and up to 1.5:1 for full output power.

RF power gain: 14db+/-1dB ( typically 25W for 600W output power.

Mains power supply voltage:85-132V with 10A main fuses and 170-265V with 6,3A main fuses, 45-66Hz single phase.

Mains power consumption in Low Energy ( stand by mode) less than 1VA.

Temperature rqnge: -10 C to + 40 C ( 14 Fto 104 F).

Relative air humidity: up to 95- - 35 C ( 95 F).

Dimensions ( projections not included) and weight 12kg( 26,5 lbs).

(W x H x D) 330 x 165 x 380mm ( 13 x 6,5 x 15 ").

Write a review

Acom 2S1 Automatic XCVR

Acom 2S1 Automatic XCVR

Acom 2S1 Automatic XCVR

ACOM Amplifier



This webshop uses cookies and other technologies so that we can improve our services and your experience on our sites. More info : Privacy & Cookies