Acom Combiner 3 Amp
1 Item Items
Warning: Last items in stock!
SPECIAL SALE: HF POWER COMBINER FOR 3x ACOM'S BLACK MODEL 2016.
Delivery only on request
Combiner for 3 Amplifiers to connect and work like one unit
For all Acom Amplifiers
Size: H 200mm x W 250mm x D450mm
Call/Mail first for the transport cost, country where you are???
We can also deliver the old frame brown and the old combiner model from 2010 till 2015 please call.
Power:600 Watt Plus ( max 750 W).
Power Mosfet Transistors:Type MRFE6VP6300H (withstand high mismatch SWR).
High resolution color display:800x480 pixels and 24-bits colors.
Intermodulation distortions (IMD 3) better than 28dB (30dB typically) below the rated PEP output.
harmonic and parasitic emmissions output suppression better than 60dB (65dB typically).
Input and output impedances: Nominal value: 50Ohm unbalanced.
UHF (SO239) Type connectors.
Input circuit: Broadband, SWR below 1.2:1 (1.1:1 typically).
Frequency :1.8-54Mhz continous range without retuning or switching.
RF by-pass path SWR-below 1.1:1 from 1.8-54MHz.
Admissible SWR at the output load (the Antenna) up to 3:1 with proportional power reduction and up to 1.5:1 for full output power.
RF power gain: 14db+/-1dB ( typically 25W for 600W output power.
Mains power supply voltage:85-132V with 10A main fuses and 170-265V with 6,3A main fuses, 45-66Hz single phase.
Mains power consumption in Low Energy ( stand by mode) less than 1VA.
Temperature rqnge: -10 C to + 40 C ( 14 Fto 104 F).
Relative air humidity: up to 95- - 35 C ( 95 F).
Dimensions ( projections not included) and weight 12kg( 26,5 lbs).
(W x H x D) 330 x 165 x 380mm ( 13 x 6,5 x 15 ").