RCU Acom 2000A
Acom RCU for 2000A
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
SPECIAL SALE FOR ACOM 2000A OLD BROWN MODELS: From 2000.
From Acom the Brown RCU controller for change the old controller on the Acom 2000A
Only by special order.
If you have a old model Acom 2000A with old RCU you can change it for the NEW RCU controller witout problems.This are the Brown model.
Please give up your sn number from the Acom 2000A.
We send this direct from the Acom factory to you.
Call / mail first to us for the transport cost,witch country you are???
Power:600 Watt Plus ( max 750 W).
Power Mosfet Transistors:Type MRFE6VP6300H (withstand high mismatch SWR).
High resolution color display:800x480 pixels and 24-bits colors.
Intermodulation distortions (IMD 3) better than 28dB (30dB typically) below the rated PEP output.
harmonic and parasitic emmissions output suppression better than 60dB (65dB typically).
Input and output impedances: Nominal value: 50Ohm unbalanced.
UHF (SO239) Type connectors.
Input circuit: Broadband, SWR below 1.2:1 (1.1:1 typically).
Frequency :1.8-54Mhz continous range without retuning or switching.
RF by-pass path SWR-below 1.1:1 from 1.8-54MHz.
Admissible SWR at the output load (the Antenna) up to 3:1 with proportional power reduction and up to 1.5:1 for full output power.
RF power gain: 14db+/-1dB ( typically 25W for 600W output power.
Mains power supply voltage:85-132V with 10A main fuses and 170-265V with 6,3A main fuses, 45-66Hz single phase.
Mains power consumption in Low Energy ( stand by mode) less than 1VA.
Temperature rqnge: -10 C to + 40 C ( 14 Fto 104 F).
Relative air humidity: up to 95- - 35 C ( 95 F).
Dimensions ( projections not included) and weight 12kg( 26,5 lbs).
(W x H x D) 330 x 165 x 380mm ( 13 x 6,5 x 15 ").