ACOM AMPLIFIER 2100 HF-6m-Warc

NEW PRICE START FROM 1 OKTOBER

Beware if you from Danmark Zweden /Norway the VAT are 25% we must charge you 4 % extra  Finland 25,5% Greece 24% Hungary 27%

Frequency Coverage

• All amateur bands from 1.8 through 54 MHz:
  • 1.800 - 2.000 MHz (160 m band)
  • 3.500 - 4.000 MHz (80 m band)
  • 7.000 - 7.300 MHz (40 m band)
  • 10.100 - 10.150 MHz (30 m band)
  • 14.000 - 14.350 MHz (20 m band)
  • 18.068 - 18.168 MHz (17 m band)
  • 21.000 - 21.450 MHz (15 m band)
  • 24.890 - 24.990 MHz (12 m band)
  • 28.000 - 29.700 MHz (10 m band)
  • 50.000 - 54.000 MHz (6 m band)*
• (*) Please, refer the applicable regional band plans and laws for specific allocations and limitations;
• In specific business cases, extensions or changes of the frequency coverage can be discussed, but this must be agreed upon before ordering. In any case, this is not the producer's obligation and can not be against local rules and laws.

Power Output

• 1500 W PEP or continuous carrier, no mode limit;

Intermodulation Distortion

• Better than 32 dB below rated output;

Hum and noise

• Better than 40 dB below rated output;

Harmonic Output Suppression

• 1.8-29.7 MHz - better than 50 dB below rated output;
• 50-54 MHz - better than 66 dB below rated output;

Input and Output Impedances

• Nominal value: 50 Ohm unbalanced, UHF (SO-239A) type connectors;
• Input circuit: broadband, SWR less than 1.3:1, 1.8-54 MHz continuously (no tunings, no switching);
• Bypass path SWR less than 1.1:1, 1.8-54 MHz continuously;
• Output (antenna) impedance matching capability: SWR up to 3:1 or higher at reduced output levels;

RF Gain

• 13 dB typically, frequency response less than 1 dB (50-85 W drive power for rated output); With 4CX1000A Tube

Mains Power Supply Voltage

• 85-132 VAC / 170-264 VAC (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps, +10% -15% tolerance), 50-60 Hz, Single phase;

Mains Power Consumption

• 3500 VA at rated output;

Safety and Electromagnetic Compatibility

• Complies with CE safety and electromagnetic compatibility requirements, as well  as with the US Federal Communications Commission (FCC) regulations;

Size & Weight (operating, excluding connected cables)

• WxDxH: 445x375x205 mm, 29.3 kg (17.6x14.8x8.1 inches, 64.6 lbs.);

Shipping Size & Weight

• Amplifier carton, WxDxH: Approx. 610x490x380 mm, 17.0 kg (24.1x19.3x15.0 inches, 37.5 lbs.);
• Transformer carton, WxDxH: Approx. 330x390x370 mm, 16.5 kg (13.0x15.4x14.6 inches, 36.4 lbs.);
• Please, contact us for shipment details;

Operating environments

• Temperature range: 0 to +50 degrees Celsius (32 degrees F to 122 degrees F);
• Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
• Height above sea level: up to 3050 m (10000 ft) without output deterioration.
• SPECIAL SALE GB ANTENNES 34 YEAR : THE BEAST ACOM 2100 

THE ACOM A CLASS 2100 LINEAR AMPLIFIER

THE ACOM 2100 NOW WITH A FAN ON THE REAR

YOU NEED SELF TO MOUNT THE TRANSFORMER INSIDE THE ACOM 2100, THIS ARE FOR THE TRANSPORT WEIGHT

SPECIFICATIONS

•Frequency Coverage: All amateur bands 1.8-54MHz; (No 60m)
extensions and/or changes on request.
•Power Output max : 2400W continuous carrier 1500 Watt, no mode limit.
•Intermodulation Distortion: Better than 32dB below rated output.
•Hum and noise: Better than 40dB below rated output.
•Harmonic Output Suppression:
- 1.8-29.7MHz - better than 50dB below rated output;
- 50-54MHz - better than 66dB below rated output.
•Input and Output Impedances:
- nominal value: 50 Ohm unbalanced, UHF (SO239) type connectors;
- input circuit: broadband, VSWR less than 1.3:1,
1.8-54MHz continuously (no tunings, no switching);
- bypass path VSWR less than 1.1:1, 1.8-54MHz
continuously;
- output matching capability: better than VSWR 3:1
or greater at reduced output levels.
•RF Gain: 13.5dB typically, frequency response less than
1dB (50-85W drive power for rated output).

Drive with 60 watt output 1900 Watt, with 85 watt drive output 2100 Watt SSB PEP
This are giving by customers.

Drive with max 40 watt RTTY-FM 1800 Watt output.( need extra Fan rear)

Delivery with the fan on the rear .

Extra to order Fan for self mounting are (69,00 euro) you need this for FT-8 and RTTY for extra airflow to the transformer.

Primary Power: 85-132V and 170-264V (100, 110, 120, 200, 210, 220, 230 & 240V nominal taps, +10%-15%tol.), 50-60Hz, single phase, 3500VA consumption at rated output. 16 Amp.
•Complies with CE safety and EMC requirements, as well as FCC regulations.
•Size & Weight :
operating: WxDxH: 445x375x205mm, 29.3kg.(17.52x14.76x8.07 inches, 64.6lbs)
•Operating environments:
-temperature range: 0...+50 degs.Celsius;
-humidity: up to 95% @ +35 degs.Celsius;
-height: up to 3000m (10000ft) above sea level without output deterioration.

CALL FOR TRANSPORT COST OUTSIDE EUROPE, WITH TRANSPORT INSCURANCE AND EXPORT PAPERS.
TRANSPORT 2 COLLI 80 lbs

EXTRA COST: EXTRA TRANSPORT BOX (3x) ON THE ACOM BOX FOR TRANSPORT, THIS HAVE THEN A TRIPLE BOX FOR PROTECTION DAMAGE. 50 Euro

Product code:851769900