Acom Amplifier 1200S HF-6m-Warc Expand

Acom Amplifier 1200S HF-6m-Warc

2 Review(s)

ACOM 1200S HF+6M+WARC

New

Acom 1200S HF-6m-warc

More details

1 Item

€ 3,150.00

tax incl.

Als u in deze webshop gaat afrekenen kunt u kiezen uit verschillende betaalmethoden.
Als u in deze webshop gaat afrekenen kunt u kiezen uit verschillende betaalmethoden.

We ship worldwide

Transport insurance possible

DELIVERY ACOM 1200S DIRECT ON STOCK PRICE ARE 3250,00 EURO.

THIS NEW PRODUCT ARE AVAILABLE ,CALL US

WE HAVE  STOCK.

LOOK ON YOUTUBE ACOM 1200S FOR POWER TEST.

ALSO NOW THE NEW AUTO TUNER ATU O4AT TO CONTROLE WITH THE ACOM 1200/600s MODEL.LOOK ON THE WEBSITE FOR MORE INFORMATION.

FOR MAX POWER 55 WATT INPUT AND MIN POWER INPUT 3/4 WATT ,SEE THIS ON YOUTUBE.

ALSO YOU CAN SEND WITH 200WATT FROM THE TX TRUE THE ACOM 1200S IN THE STANDBY MODE, (NOT WITH IN TX MODE,THIS WILL GIVE INPUT POWER PROTECTION).

Power: 1200Watt plus

Input 55 Watt drive CW output 1200Watt +

Input 45 Watt drive CW output 1100Watt out

Input 28 Watt drive CW output 1000 Watt out

Input 3/4 Watt drive CW output 350 Watt out

Mode: SSB/CW/RTTY/AM/FM

Frequency:1,8~54MHz EU MODEL US model block on 28/24Mhz TX
Europe model have NO block on 28/24MHz and are for 230/240V

ALSO TX ON 60M BAND 5.300-5.500 MHz

Give your power (110-220-230-240 VDC) up to us so we can set this for the correct current from your country.

On/Off switch on the rear from the Acom

Standby switch on the front from the Acom

High resolution display 5':800x480 pixels and 24-bits colors

Intermod:30dB

Harmonic supperession better than 60db (65db nominal)

Mosfet Transistors:BLF188xr ( power 1400W to 600MHz)
Price: 189,00 euro

RF Gain: 13db

Antenne Output: 1x SO239

Antenne Input:50 Ohm

Antenne Input: 1x SO239

Connector: RS-232 for remotely controlled by interface

Connector: CAT/AUX

Connector: KEY IN

Connector: KEY OUT

Current :110~220~230~240Volt 12 Amp
For expeditions and field operations main voltage range ( 93V+265V) with PCF (power factor correction), and from unstable mains, generators ect, thanks to the built-in switching mode power suppy (SMPS)

Size: 162mmx418mmx372mm

Weight: 15kg (30lbs)

Transport weight: 20kg (40lbs) triple box for transport (size:580mmx580mmx310mm)

Warranty:24mnd

The overall operation of ACOM 1200S is extremely simplified:the screen menus are intuitive and easy to follow and no special skill is required from the operator when changing frequency bands.

Mail us for the transport cost outside Europe, (country where you are).

Transportcost on the website outside Europe are not correct call us for the correct transportcost en inscurance cost for the Acom 1200S Amplifier.

Transport outside Europe with :UPS FEDEX DHL DB Schenker GLS, WE SCHIP ACOM IN TRIPLE TRANSPORTBOX.

We will call for you for the best transport cost.

If you have a account from the above transport company we can ship on your account to you.

EXTRA TO ORDER :

Now we have also TX  banddata cable for the Flex radio's to controle the Acom for band switching give your model for the correct cable ,price 59,95 euro

Also band data cable for Yaesu-Kenwood price 39,95 euro

Icom don't have banddata controle only CAT.( CI-V Serial Cat TTL cable ) price 35,95 euro

Also power cable with special connector for UK price 10,95 euro

VERRY IMPORTANT INFO FROM ACOM:

You can just connect the RCA TX cable from the Transceiver to the Acom 1200S and change into the menu from the Acom 1200S the setting to MOSFET KEYING, ore RELAY KEYING.  ( this are up to you what you wanted)

Also you can take the new tuner O4AT to work with the Acom 1200S/P

Power:600 Watt Plus ( max 750 W).

Power Mosfet Transistors:Type MRFE6VP6300H (withstand high mismatch SWR).

High resolution color display:800x480 pixels and 24-bits colors.

Intermodulation distortions (IMD 3) better than 28dB (30dB typically) below the rated PEP output.

harmonic and parasitic emmissions output suppression better than 60dB (65dB typically).

Input and output impedances: Nominal value: 50Ohm unbalanced.

UHF (SO239) Type connectors.

Input circuit: Broadband, SWR below 1.2:1 (1.1:1 typically).

Frequency :1.8-54Mhz continous range without retuning or switching.

RF by-pass path SWR-below 1.1:1 from 1.8-54MHz.

Admissible SWR at the output load (the Antenna) up to 3:1 with proportional power reduction and up to 1.5:1 for full output power.

RF power gain: 14db+/-1dB ( typically 25W for 600W output power.

Mains power supply voltage:85-132V with 10A main fuses and 170-265V with 6,3A main fuses, 45-66Hz single phase.

Mains power consumption in Low Energy ( stand by mode) less than 1VA.

Temperature rqnge: -10 C to + 40 C ( 14 Fto 104 F).

Relative air humidity: up to 95- - 35 C ( 95 F).

Dimensions ( projections not included) and weight 12kg( 26,5 lbs).

(W x H x D) 330 x 165 x 380mm ( 13 x 6,5 x 15 ").

Grade 
10/15/2018

Acom 1200S

I used many years my ACOM1000
but now i want use that CAT and
automatic Tuning wich works great
with my new Acom 1200S. The owner of GB-antennas is very helpful and the delivery to Portugal was within 5 days.
I recommend this Amplifier and
GB-antennas.

Grade 
11/20/2017

Acom 1200 S

Have looked a while for an amplifier. I bought the Acom 1200 S from GB Antennes and must tell that I am very happy both with the device and GBAntennas assistance. Very well built, easy to implement and to work with (with respect to the legal limits) .
F4HSB

Write your review! !

Write a review

Acom Amplifier 1200S HF-6m-Warc

Acom Amplifier 1200S HF-6m-Warc

ACOM Amplifier

Informatie

Accept

This webshop uses cookies and other technologies so that we can improve our services and your experience on our sites. More info : Privacy & Cookies