Cart
0
Product:
Products:
(empty)
No products
To be determined
Shipping
€ 0.00
Tax
€ 0.00
Total
Prices are tax included
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
(tax incl.)
Total shipping (tax incl.)
To be determined
Tax:
€ 0.00
Total
(tax incl.)
T:+31-181410523 T:+31-622247606
Voorstraat 47 Brielle NL
hours Mo-Fri 9:00-17:30
Sa 10:00-17:00
PALSTAR AT4K
Palstar AT4K
New
PALSTAR AT4K
1 Item
Warning: Last items in stock!
Rating
PALSTAR AT4K HF TUNER
Frequency:1,8-30MHz (6m+4m)
Power:2500 Watt
Coax connections: 3
Coax and Openwire
Volt:12V
Weight:10kg (20lbs)
Size: 40x20x49cm
Warranty palstar 12 month
Transportcost Europa insurance (5500 euro) 20kg: 49,80 euro
Transportcost World insurance (5500 euro) 20kg :112,80 euro
Only on special order
| Output Power: | 2500 Watts single tone continuous |
| HF Bands: | 160m to 10m 6m+4m(assuming resistive load) |
| Tuning: | Three controls |
| Antenna switching: | 10 Amp RF 6 position mode switch for multiple antennas |
| Capacitor: | low minimum custom variable capacitor; 460pF-6 kV |
| Roller inductor: | 10 Amp silver-plated inductor wheel shaft and contact wheel on ceramic body |
| Impedance: | matching range 20 Ohms to 1500 Ohms |
| Metering: | Active crossneedle Peak/Peak Hold with backlighting |
| Meter power range: | 0-300 Watts/ 0-3000 Watts |
| Balun: | Ferrite 1:1 inpupt balun |
| Output: | Unbalanced/Balanced activated by front panel switch |
| Chassis: | .090 ga. aluminium gold iridite coated |
| Top cover: | .090 ga. aluminium powder coated |
| Front cover: | .090 ga. aluminium powder coated |
| Dimensions: | 15 1/8" wide x 7 5/8" high x 19" deep |
| Shipping weight: | 20 lbs |
| Warranty: | One year |
| Output Power: | 2 to 1800 Watts |
| HF Bands: | 160m to 6m |
| Tuning time: | 4-6 seconds processor controlled |
| Display: | 4 line large print |
| Capacitor: | large plate variable differential |
| Roller inductor: | ceramic |
| Outputs: | Three (3) S0239 coax connectors |
| Chassis: | .090 ga. aluminium gold iridite coated |
| Top cover: | .090 ga. aluminium iridite coated |
| Dimensions: | 12.5" wide x 6.5" high x 16.5" deep |
| Shipping weight: | 25 lbs |
| Warranty: | One year |
8 other products in the same category:
PALSTAR Tuners-SWR Watt meter
- Electro Voice Studio Microphone
- Rotator cable
- Repair
- GB Guy material
- Ham-Broadcast Audio Systems
- Audio Technica Studio Microphone
- GB Photo gallery
- Symetrix Parts
- Second Hands Gear
- Coax Cable
- Transmitting Tubes
- TE Systems Amp VHF/UHF/SH
- DC Power Supply
- HF Amplifiers
- Special Products
- HF Tuners
- RODE Broadcast Studio Microphone
- GFK Fiberglass sold tubes
- RigExpert Analyzers
- GFK Fiberglass mast
- RFI Ferroxcube material
-
Antennas
- GB 6m Yagi/Quad Antennas
- HF Quads Monoband
- GB 4m Yagi/Quad Antennas
- GB 144/50/70/430MHz Quad Parts
- GB 144MHz Yagi Antennas
- HF Yagi Parts
- GB 430MHz Yagi Antennas
- GB 144-453MHz verticals
- GB Broadcast Antennas
- Wire Antennas
- GB Special Antennas
- GB Log-Per Antennas
- HF Mini Beams MQ Yagi
- GB Combi 4m/6m Yagi/Quad Antenna
- GB 430MHz/144MHz Quad
- HF Yagi Antennas
- GB 144MHz Quad Antennas
- HF Quads
- GB 27MHz Yagi/Quad Parts
- GB Combi 6m/144MHz Quad
- GB HF Verticals
- GB Combi 2m/6m/70/23cm Yagi
- GB 27MHz Yagi/Quad Antennas
- HF Quad Parts-wire
- HF Logcel Yagi Antennas
- HF Mobile Antennes
- GB 430MHz Quads
- Towers
- Rotators
- Transceivers
- Special
- kenwood parts
- RODE Parts Swifel arm Microphones
- GFK Fiberglass Round Tube
- SDR HF-UHF Transceiver
- Dustcovers for Transceivers and Amplifier
- Isotron HF Antennas
- Lightning Protectors
- GAP Studio Microphones
-
Pop shield for Microphone
€ 21.83 -19% € 26.95
Viewed products
Blog
-
Acom 1200S Solidstate Amplifier
Acom 1200S Solidstate Amplifier
