Symetrix 532E Graphic Equalizer
Symetrix 532E 2x31 Channel Graphic Equalizer
1 Item Items
Warning: Last items in stock!
2 x 31 BAND Professional Symetrix Graphic Audio Equalizer 532E (we have only 1 on stock)
YOU CAN PUT 2 MICROPHONES ON 2 HF TRANSCEIVERS ON THIS UNIT WITH 2 SYMETRIX VOICE PROCESSORS, AND FOR THE RADIO STUDIO.
Comes from Dutch Radiostations and where mounted into (19'rek).have same light marks.
These units where professional refurbished in the Symetrix shop, and are offered with a 1 year warranty against proper usage.
Audio channels: 2
Maximum input level: +21dBu balanced
Maximum output level: +21dBu balanced +17dBu Unbalanced
THD+Noice (1kHz at +4dBu) <0.002% (10 Hz to 30kHz measured bw,eqin all bands flat)
Signal to noice ratio: .94dB (unweighted, ref to +4dBu, eq in all bands flat)
Dynamic Range: >112dB
Frequency responce: 10Hz-38kHz(+0dB,-1dB)
Input impedance: 10K ohms bal,5K ohms unbal
Output impedance: 400 ohms bal,200 ohms unbal
Low Cut filter Slope: 12dB/octave
Cutoff frequency range: 6Ha-260Hz
High Cut filter slope: 12dB/octave
Cutoff frequency rangs:3kHz-65kHz
Graphic eq controls Frequency controle Range: 20Hz-20kHz
31 band ISO 1/3 rd octave centers
Cut/Boost range:+/-12dB (mode switch up)+/-6dB (mode switch down)
Chassis z=size : 9,75cmH x 48,3cm Wx20,32cm D ( 3,5'Hx19'Wx8'D)
Weight: 6kg 12 lbs
AC Requirements: 117VAC nominal,105-130VAC,50-60Hz or 230VAC nominal,207-235VAC,50Hz
Power Consumtion: 20 Watt maximum
Last photo you see the EQ 531e with Symetix 528E for the Icom 7700 and the Rode Broadcaster microphone
User's Guide included
Special power cable 110-230VDC on the GB website.
We have for UK 230VDC and USA 110VDC and Europe power cable 230VDC
Transport cost CALL.
No VAT on this unit.