Acom 2020S 1500 Watt Solid State Amplifier HF-50MHz

NIEUW PRIJS PER 1 OKTOBER 2024

Frequency Coverage

• All amateur bands from 1.8 through 54 MHz:
  • 1.800 - 2.000 MHz (160 m band)
  • 3.500 - 4.000 MHz (80 m band)
  • 5.020 - 5.455 MHz (60 m band)*
  • 7.000 - 7.300 MHz (40 m band)
  • 10.100 - 10.150 MHz (30 m band)
  • 14.000 - 14.350 MHz (20 m band)
  • 18.068 - 18.168 MHz (17 m band)
  • 21.000 - 21.450 MHz (15 m band)
  • 24.890 - 24.990 MHz (12 m band)
  • 28.000 - 29.700 MHz (10 m band)
  • 50.000 - 54.000 MHz (6 m band)*
• (*) Please, refer the applicable regional band plans and laws for specific allocations and limitations;
• In specific business cases, extensions or changes of the frequency coverage can be discussed, but this must be agreed upon before ordering. In any case, this is not the producer's obligation and can not be against local rules and laws.

Rated Output Power

• 1500 W, PEP or continuous carrier, no mode limit;

Intermodulation Distortion (IMD3)

• Better than 30 dB below rated PEP;

Harmonic and Parasitic Emissions Output Suppression

• 1.8-29.7 MHz - better than 60 dB below rated output;
• 50-54 MHz - better than 70 dB below rated output;

Input and Output Impedances

• Nominal value: 50 Ohm unbalanced, UHF (SO-239A) type connectors;
• Input: Broadband, SWR below 1.2 (1.1 typically), 1.8-54 MHz continuous range without retuning or switching;
• RF bypass: SWR - below 1.1, 1.8-54 MHz;
• Output: Antenna SWR below 1.5 is recommended; up to SWR 3 is allowable with proportional power reduction;

RF Power Gain

• 14 dB ±1 dB (typically 60 W drive for 1500 W output); With  MRFX1K80HRS Mosfet

Mains Power Supply Voltage

• 200-240 VAC, ±10% (180-264 VAC limits), 50-60 Hz, Single phase;

Mains Power Consumption at Rated Output Power

• Up to 3300 VA;
• Power factor of 0.95 or higher (PFC-corrected current);

Mains Power Consumption in Low Energy (Waiting) Mode

• Less than 1 VA;

Receive / Transmit Control

• KEY-IN - Phono RCA connector
  • Voltage applied to the transceiver keying output - up to +12 V;
  • Closed-circuit current flow to the transceiver keying output - up to 6 mA;
• KEY-OUT - open-drain Phono RCA connector
  • Output resistance: not more than 120 Ohm;
  • The maximum allowable open-circuit voltage coming from external devices connection: +50 V;
  • Maximum allowable closed-circuit current flow by external devices: 20 mA;
• Minimum required time of sequencing between sending a request for transmitting (KEY-IN "ground on transmit" signal) and applying RF drive power at RF INPUT connector for safely switching receive to transmit: 10 ms.

Safety and Electromagnetic Compatibility

• Complies with CE safety and electromagnetic compatibility requirements, as well  as with the US Federal Communications Commission (FCC) regulations;

Size & Weight (operating, excluding connected cables)

• Amplifier, WxDxH: 428x425x190 mm, 21.9 kg (16.9x16.8x7.5 inches, 48.3 lbs.);
• Remote Control Unit, WxDxH: 204x144x92 mm, 0.9 kg (8.1x5.7x3.7 inches, 2.0 lbs.);

Shipping Size & Weight

• WxDxH: Approx. 740x600x370 mm, 29.0 kg (29.2x23.7x14.6 inches, 64.0 lbs.);
• Please, contact us for shipment details;

Operating environments

• Temperature range: -10 to +40 degrees Celsius (14 degrees F to 104 degrees F);
• Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
• Height above sea level: up to 3050 m (10000 ft) without output deterioration.

THE ACOM 2020S IS A STATE-OF-THE ART 1500W HEAVY-DUTY SOLID-STATE LINEAR AMPLIFIER,COVERING ALL AMATEUR BANDS FROM 1,8 TO 54MHz

Weight :22 kg

OF MAAK EEN PRE-ORDER.

The amplifier employs two powerful modules in power splitting/combining technique which is well time-proven in high-power commercial applications to provide sufficient output headroom. Thanks to input and output ports isolation from each other, the intermodulation is reduced, and SWR toughness, self-excitation resistance, and reliability are improved.

ACOM 2020S features a Remote Control Unit model R05 with the operating information shown on a multi-functional, high resolution color touch screen. All indicators and controls are accessible via the touch screen RCU, as well as, all command input to the RCU is menu-driven.

As standard, the ACOM 2020S is equipped with Ethernet interface facilitating its usage in Remotely Operated Stations.

Product code: 85176990

LEES DIT OOK:

Many customers asked us:
What is the warranty of the LDMOS transistors used in ACOM power amplifiers?
The answer is easy, but first, please read these statements:

NXP Semiconductors | LDMOS transistors producer | www.nxp.com(link is external)
" ... NXP makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does NXP assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in NXP data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. ...". 
" ... (c.) Time Period. Except as provided in subsections (d) and (e) below, Products are warranted for a period of one (1) year from date of delivery to Buyer. ...".

AMPLEON | LDMOS transistors producer | www.ampleon.com(link is external)
" ... Seller warrants that under normal use the Products (excluding any Excluded Products) shall, at the time of delivery to Buyer and for a period of twelve (12) months thereafter (or such other period as may be agreed upon in writing by the parties), be free from defects in material or workmanship and shall substantially conform to Seller’s specifications for such Products, or such other specifications as Seller has agreed to in writing, as applicable. ...".