ACOM 500S 160m/10m +50MHz+70MHz

KAN OOK REMOTE GEBRUIKT WORDEN MET DE eBOX

GB ANTENNES 34 JAAR

AMPLIFIER ACOM 500S 

LEVERTIJD IS 1 WEEK

LET OP DE TUNER O6AT ZIT ER NIET BIJ DE LEVERING DEZE IS APART TE BESTELLEN OP DE WEBSITE

Frequency Coverage

• All amateur bands from 1.8 through 70.5 MHz;
• Extensions and/or changes on request;

Rated Output Power

• 500 W ±0.5 dB, PEP or digital;

Intermodulation Distortion (IMD3)

• Better than 30 dB below rated PEP;

Harmonic and Parasitic Emissions Output Suppression

• Below 30 MHz - better than 50 dBc below rated output;
• Above 30 MHz - better than 70 dBc below rated output;

Input Impedances

• Nominal value: 50 Ohm unbalanced, UHF (SO-239A) type connectors;
• SWR: Below 1.5 (1.2 typically), 1.8-70.5 MHz continuous range;
• RF bypass: SWR - below 1.1, 1.8-70.5 MHz;

Antenna Impedance

• Nominal value: 50 Ohm unbalanced;
• Two antenna outputs available:
  • RF OUTPUT 1 output provides seamless integration with the auto-switching antenna tuners ACOM 04AT or ACOM 06AT, for access from amplifier's front panel to 4 antennas having an SWR up to 3, within 160 to 6 meter bands;
  • RF OUTPUT 2 - A well-matched antenna with an SWR below 1.5 can be connected to this output for any band. While low SWR is good for any band, it is extremely important on 6 and 4 m. RF OUTPUT 2 is not intended for ACOM 04AT or ACOM 06AT antenna tuners;
• Antenna connectors: PTFE UHF (SO-239A) type;

RF Power Gain

• 14 dB ±1 dB (typically 20 W drive for rated output); Met Mostfet MRF1K50H

Mains Power Supply Voltage

• 100-240 VAC ±10%, 50-60 Hz, Single phase;

Mains Power Consumption at Rated Output Power

• Up to 1000 VA;
• Power factor at rated output: 0.95 or higher;

Mains Power Consumption in Low Energy (Waiting) Mode

• Less than 1 VA;

Safety and Electromagnetic Compatibility

• Complies with CE safety and electromagnetic compatibility requirements, as well  as with the US Federal Communications Commission (FCC) regulations;

Size & Weight (operating, excluding connected cables)

• WxDxH: 291x270x157 mm, 7.8 kg (11.5x10.7x6.2 inches, 17.2 lbs.);

Shipping Size & Weight

• WxDxH: Approx. 500x470x380 mm, 11.6 kg (19.7x18.5x15.0 inches, 25.6 lbs.);
• Please, contact us for shipment details;

Operating environments

• Temperature range: -10 to +40 degrees Celsius (14 degrees F to 104 degrees F);
• Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
• Height above sea level: up to 3050 m (10000 ft) without output deterioration.

Compact and lightweight construction
Convenient for expeditions and field operation due to the extremely compact and lightweight construction and the built-in switching-mode power supply (SMPS). SMPS operates with extended mains voltage range of 100-240 VAC, with no internal switch over. The consumed current is purely sinusoidal, Power Factor Corrected (PFC) and inrush limited. This makes the operation of unstable mains and generators easy and trouble-free.

Easy to operate
The overall operation of ACOM 500S is extremely simplified: the screen menus are intuitive and easy to follow, and no special skill is required from the operator when changing frequency bands.

User-friendly automatic control
When connected to a transceiver with CAT capability, the amplifier will track the operating frequency and will change bands accordingly. Even if not CAT connected, the amplifier monitors the input signal frequency through the built-in frequency counter and automatically switches bands.

PRODUCT CODE:85176990

TRANSPORTKOSTEN VOOR DE AMPLIFIER , MET EEN TRANSPORTVERZEKERING ,EN WORDT AANGETEKEND VERSTUURD.

LEES DIT OOK:

Many customers asked us:

What is the warranty of the LDMOS transistors used in ACOM power amplifiers?
The answer is easy, but first, please read these statements:

NXP Semiconductors | LDMOS transistors producer | www.nxp.com(link is external)
" ... NXP makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does NXP assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in NXP data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. ...". 
" ... (c.) Time Period. Except as provided in subsections (d) and (e) below, Products are warranted for a period of one (1) year from date of delivery to Buyer. ...".

AMPLEON | LDMOS transistors producer | www.ampleon.com(link is external)
" ... Seller warrants that under normal use the Products (excluding any Excluded Products) shall, at the time of delivery to Buyer and for a period of twelve (12) months thereafter (or such other period as may be agreed upon in writing by the parties), be free from defects in material or workmanship and shall substantially conform to Seller’s specifications for such Products, or such other specifications as Seller has agreed to in writing, as applicable. ...".